The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Emulex LightPulse PCI-X 2GB FC Adapter LP9802

$4.40
(No reviews yet) Write a Review
Request a Quote

Emulex LightPulse LP9802 2Gb Fibre Channel PCI-X Adapter (LP9802) is a single-port Fibre Channel Host Bus Adapter (HBA) designed to provide high-speed SAN connectivity for servers and enterprise storage environments. It supports 1Gb/s and 2Gb/s Fibre Channel links with automatic speed and topology negotiation, uses a 64-bit PCI-X interface up to 133MHz, and provides an LC optical interface for Fibre Channel networking.

  • Part Number / Model: LP9802

  • Manufacturer: Emulex

  • Product Family: LightPulse

  • Product Type: Fibre Channel Host Bus Adapter (HBA)

  • Port Count: 1 × Fibre Channel port

  • Fibre Channel Speed: 1Gb/s / 2Gb/s

  • Maximum Link Speed: 2.125 Gb/s

  • Data Transfer: Full-duplex 2Gb/s Fibre Channel

  • Host Interface: 64-bit PCI-X / PCI

  • PCI-X Bus Speeds: 66 / 100 / 133 MHz

  • PCI Compatibility: PCI-X 1.0a and PCI 2.2

  • PCI Signaling: 3.3V; 5V tolerant

  • Fibre Channel Connector: LC optical connector

  • Optical Media: 50/125µm and 62.5/125µm multimode fiber; single-mode fiber also supported depending on optical variant

  • Fibre Channel Topologies: Point-to-point, arbitrated loop and switched fabric

  • Fabric Support: F_Port and FL_Port

  • Fibre Channel Classes: Class 2 and Class 3

  • Protocols: SCSI/FCP, IP over Fibre Channel and FC-Tape

  • Memory: 2MB Flash + 2MB QDR SRAM

  • Controller Technology: Emulex Pegasus ASIC

  • Onboard Processor: 266 MIPS

  • Features: Automatic speed negotiation, automatic topology detection, fabric boot, hardware context caching and end-to-end parity protection

  • Form Factor: Short, low-profile MD2 PCI-X card

  • Dimensions: Approximately 6.60 × 2.54 inches (167.64 × 64.42 mm)

  • Bracket: Low-profile or standard-height bracket options

  • Operating Systems: Windows Server 2003, Windows 2000/NT, Linux, HP-UX, NetWare and Solaris

  • Application: Enterprise SAN connectivity, server storage networking and Fibre Channel tape/storage environments

  • Compatible Hardware: x86, SPARC and PowerPC PCI/PCI-X server platforms

  • Power Consumption: Approximately 7.7W at 66MHz; 8.5W typical at 133MHz

  • Optical Variant: LP9802-F2 uses an embedded multimode LC optical interface; LP9802-X2 uses an embedded single-mode LC interface.