QLogic SANblade QLA2310F 2Gb Fibre Channel PCI-X Host Bus Adapter (QLA2310F) is a single-port Fibre Channel HBA designed to provide high-speed SAN connectivity between servers and Fibre Channel storage networks. The QLA2310F uses a 64-bit, 66MHz PCI-X host interface and supports 1Gb/s and 2Gb/s Fibre Channel operation with multimode optical connectivity. QLogic specifies support for point-to-point, arbitrated-loop and switched-fabric topologies.
-
Part Number / Model: QLA2310F
-
Manufacturer: QLogic
-
Product Family: SANblade 2300 Series
-
Product Type: Fibre Channel Host Bus Adapter (HBA)
-
Port Count: 1 × Fibre Channel port
-
Fibre Channel Speed: 1Gb/s / 2Gb/s
-
Maximum FC Data Rate: 2Gb/s
-
Host Bus Interface: 64-bit PCI-X
-
PCI-X Bus Speed: 66MHz
-
PCI Compatibility: PCI 2.2 / PCI-X Addendum 1.0
-
PCI Signaling: 3.3V and 5V buses supported
-
Fibre Channel Media: Multimode optical fiber
-
Optical Connector: LC
-
Fibre Channel Topology: Point-to-point, FC-AL/FC-AL-2 and switched fabric
-
Fabric Ports: F_Port / FL_Port
-
Fibre Channel Classes: Class 2 and Class 3
-
Controller: QLogic ISP2310
-
Data Transfer: Up to 200 MB/s half-duplex / 400 MB/s full-duplex
-
Protocol Support: SCSI/FCP and IP over Fibre Channel
-
Features: Automatic 1Gb/s/2Gb/s speed negotiation, automatic topology detection, persistent binding, LUN masking and diagnostic functions.
-
Form Factor: PCI-X adapter card
-
Application: Enterprise SAN connectivity, Fibre Channel storage and tape environments
-
Operating Environment: 0°C to 55°C operating temperature; 10%–90% non-condensing operating humidity.
-
Related Models: QLA2310 — copper-media version; QLA2310FL — low-profile optical version
