HP Serial ATA Data Cable (448180-001) is a genuine HP internal SATA data cable designed to connect non-hot-plug SATA hard drives to the system board or SATA controller in compatible HP ProLiant servers. The cable is approximately 18 inches (450 mm) long and is identified by HP documentation as the SATA HDD cable for the ProLiant DL120 G5 and as a non-hot-plug SATA drive data cable in the ML330 G6 service documentation.
-
Part Number: 448180-001
-
Manufacturer: HP
-
Product Type: Internal Serial ATA (SATA) Data Cable
-
Interface: SATA / Serial ATA
-
Cable Length: Approximately 18 inches / 450 mm
-
Cable Type: Flat internal SATA data cable
-
Connector Configuration: SATA data connectors; straight-to-upright/angled configuration depending on the assembly version
-
Application: Internal connection of non-hot-plug SATA hard drives
-
Drive Interface: SATA HDD
-
Installation: Internal server chassis
-
Hot-Plug Support: No — intended for non-hot-plug SATA drive configurations
-
Compatible Systems: HP ProLiant DL120 G5, DL160 G5, DL180 G6, ML110 G5/G7, ML310e G8 and other compatible HP systems using this SATA cable assembly.
-
ML330 G6 Application: Listed by HP as the Non-hot-plug SATA drive data cable.
-
Cable Color: Red/black flat cable assembly, depending on production revision
-
Related Part Number: 452334-001 is listed as an associated/replacement SATA cable number for this cable family.
